Menu
Your Cart

Oconner

Model: 8281
Mitchell base adapter allows mounting all Oconnor's Ultimate Series fluid heads (except Ultimate Digital 50-200 head) on Mitchell base tripods. Requires Mitchell base tiedown...
Model: 8349
The 08349 Studio Pedestal/Tripod Adapter from OConnor enables you to mount a Mitchell or 150mm base head on a Vinten, Sachtler, or another broadcast-style support. Use this versatile adapter to mount your head onto a studio or ENG-style tripod, pedestal, or jib.This plate incorporates studio 3-bolt, 4-bolt, and Vinten Quickfix mounting holes. The same screws that hold the original base to your head can be used to attach the adapter.Compatible Head BasesMitchell150mm baseMounting Holes3-bolt and 4-bolt studioVinten Quickfix..
Model: 1030-268
The OConnor 1030-268 Large European Quick Release with 120mm camera mounting plate is for use with the OConnor 1030B and 1030S fluid heads. It is employed when rapid mounting and dismounting is required with large, heavy cameras...
Model: C1243-1129
The OConnor 114-55mm Threaded Universal Step-Down Ring is a threaded step-down ring compatible with the OConnor O-Box WM matte box. Use this versatile ring to replace multiple reduction rings when shooting with lenses of varying sizes. Its flexible fabric inner ring reduces the outer 114mm diameter and adapts to any lens with a front barrel diameter from 55mm to 104mm.Use in place of multiple reduction rings when using lenses of varying sizes with the OConnor O-Box WM matte boxFlexible inner fabric ring accommodates lenses with a front barrel diameter from 55mm to 104mmLightweight, sturdy alum..
Model: C120EX-CINEM-F
The 120EX Fluid Head & Cine HD Mitchell Top Tripod with Ground Spreader from OConnor includes the 120EX fluid head with a payload capacity of 120 lb for the ±90° tilt range. It offers a maximum payload of 240 lb at 8" center of gravity with a ± 60° tilt range. The aluminum Cine HD tripod on its own can support payloads up to 309 lb and offers height adjustment from 33.6 to 69.2". The ground-level spreader enhances the stability of the tripod with heavy loads, providing protection for delicate floor surfaces.OConnor C12250001 120EX Standard Film Fluid Head (Black)The OConnor 120EX Standard Asse..
Model: C1226-0001
The Oconnor 120EXe Fluid Head is a heavy duty fluid head that shares the same features as the OConnor 120 EX, however it also digitally encodes pan and tilt position information for visual effects work, including compositing and motion capture. The Fluid head supports camera loads from 30 to 120 pounds that have a center of gravity 8" inches above the fluid head. The included geared camera platform helps you make minor adjustments to the balance of the camera on the head. With a properly balanced load up to 120 pounds, the fluid head is able to tilt 90 degrees forward and back, and the counter..
Model: C1243-1117
This OConnor Bellows Ring is a 150-114mm threaded ring that reduces the opening of an OConnor O-Box WM, enabling you to use lenses with a 114mm outer diameter. A threaded retaining ring supports mounting 138mm round filters...
Model: C1245-2046
Mount accessories to your rig with this pair of 12" OConnor 15mm Rods. These rods will attach to rigs, rod clamps, baseplates, or cameras that support the 15mm LWS or 15mm studio standards, allowing the attachments of industry standard equipment including follow focuses, lens supports, lens control motors, and more...
Model: C1245-2040
Mount accessories to your rig with this pair of 18" OConnor 15mm Rods. These rods will attach to rigs, rod clamps, baseplates, or cameras that support the 15mm LWS or 15mm studio standards, allowing the attachments of industry standard equipment including follow focuses, lens supports, lens control motors, and more...
Showing 1 to 12 of 132 (11 Pages)